Skip to content

Lovelorn Scalloped Edge Mini Quilt {tutorial}

2014 August 27

A few months ago Lindsay from Stay Home Fabrics asked me if I could create a tutorial using fabric from her online shop. Of course, more fabric? How could I resist! And it’s even more fun because she’s selling a kit for my mini quilt in her shop. It’s times like these that I LOVE being a blogger, Yippee! Lindsay also has provided a discount code for you to use in her shop (Thanks Lindsay!), use the code “sewhappy” to get 15% off your entire purchase! (Valid until Sept 3, 2014)

When I received the Lovelorn 5″ charm pack from her I sat on my living room floor and set those 49 squares into about a dozen combinations before I sorted out the arched design. But it still needed something fun, so I added a scalloped edge to the bottom of the quilt. Just in case the fabrics weren’t feminine enough on their own! I can see it being used for a baby’s quilt or playmat or a toddler cuddle quilt. For older kids (like mine), keep it in the car for cold winter days when their legs need a bit of extra warmth – think dresses in Canadian winters!

Don’t be fooled by the scalloped border, this mini quilt is very simple to make. It finishes at around 31″ square, and is sewn “pillowcase style” so it doesn’t require a binding. I didn’t even use a walking foot to quilt it! This project is easily finished within a day, so it would be a perfect quick shower or new baby gift. I think an advanced beginner would have no problems finishing this quilt, provided that you have some experience sewing curves.

Before we get to the tutorial, and just in case you need something to spend your 15% discount on, (like we all need a discount to force us to buy new fabric?!), Lindsay just posted some new fabric in her store for you! Here are just a few from the new Indelible collection by Katarina Roccella for Art Gallery. (Click the photos below to visit the listing in the Stay Home Fabrics shop.)

Ready to make a quilt?

You will need:

Before you begin:
  • Since you are using a charm pack, there is no need to pre-wash your fabrics. I washed my quilt before I took these photos and it came out just fine.
  • Print and cut out the Scalloped Edge Pattern Piece, check the 1″ square to make sure it is the correct size. Make sure to use the “actual size” setting when printing it out.
  • Double-check to make sure you know how to sew an accurate and consistent 1/4″ seam on your machine. Here’s a good tutorial on accurate 1/4″ seams.

Here’s how to make it:

  1. Begin by finding a flat area (floor or table-top) to lay out your pre-cut charm squares. Follow the diagrams below to lay the pieces out in the correct order. When you finish, you will have a square 7 pieces high by 7 pieces wide. Make sure all of your one-direction fabrics are facing in the same direction!
  2. Next, stack your fabrics in order into piles (one for each row) with the left-most charm square on the top of the pile. I keep track of this left-most square by placing a pin on the left side of it. This also helps to keep track of which way “up” the quilt rows go together, since it can be simple to accidentally reverse a row by placing it upside-down. The pinned square is always on the left of the quilt.
  3. Stitch your rows together by placing each fabric square right-sides-together with its adjacent square and sewing a 1/4″ seam. Then add the next adjacent square to the first two and so on. When you finish you will have 7 rows pieced together. Since the rows are in piles, begin by placing the top square right-sides-together (RST) with the square underneath it, stitch, then add the next square etc…
  4. Press all of your seams open or to the side.
  5. Now we can sew our rows together to create the quilt top. Match the adjacent raw edges of each row in order, just like you did with the charm squares and stitch them together with a 1/4″ seam. I like to pin at each seam, to make sure they match up. Here is a good tutorial on matching quilt seams. Press all of your seams open or to the side.
  6. Now you should have an aproximately 33″ square quilt top. (Congratulations!) Go ahead and square up the quilt top. Here is a good tutorial on squaring up a quilt. (They square it after it is quilted, but we need to do this step now because we are not binding this quilt.)
  7. Layer your 33″ square batting with the quilt backing right-side-up on top of it. Now place the quilt top right-side-down on the quilt backing. This is your quilt sandwich. You will need the back and batting to be the same size as the quilt top, so smooth everything down (really well!) and cut away the excess. It is best to use a ruler and rotary cutter for this step, so the quilt stays square.
  8. Pin well around all four edges of your quilt. It is a good idea to do this right after you square up the quilt and before you move it, since moving the quilt between the cutting and pinning will shift the layers around.
  9. Mark a 6″ space on one side of the quilt (not on the bottom scalloped edge). Stitch around all four edges of the quilt with a generous 1/4″ seam, leaving the space open for turning. Stitch with the quilt top under your presser foot and the batting next to your feed dogs. Make sure the layers feed evenly through the machine.
  10. Use the pattern piece to trace the scallops onto the bottom edge of the quilt. Line up the pattern piece so the scallop is even with the seam you just stitched. The edges of the traced scallops will meet at each seam.
  11. Pin the scalloped edge of the quilt. I pinned once on each side of each curve and at every seam.
  12. Stitch along your traced scallops, pivoting at each seam to begin the next curve.
  13. Trim the scalloped edge to 1/4″ and clip all curves. Clip into each pivot point, being careful not to cut your seam! Remove any previous stitches that might be inside of your curved stitching. Clip the two top 90 degree corners of the quilt to reduce bulk.
  14. Press the seam allowance within your 6″ gap to 1/4″ on both sides – press the batting back as well. This sewing trick is better explained here.
  15. Turn your quilt right side out, push out all corners and edges. Press well – especially around the edges of the quilt, ensuring they are all even. Pin the opening closed. Take care to ensure the edges match once they are pinned.
  16. Carefully stitch the opening closed with a ladder stitch. Here is a tutorial on how to hand sew a ladder stitch.
  17. Smooth out the quilt again on a flat surface and use safety pins to baste the quilt so it is ready for hand quilting. I used safety pins and placed one in the centre of each square. Use more or less depending on what you are comfortable with.
  18. Top-stitch around the entire edge of the quilt roughly 1/8″-1/4″ from the edge.
  19. To begin quilting, stitch all the way around the centre dark pink block in the quilt. I used my presser foot as a guide to stitch approximately 1/4″ away from the block on all sides. Move one block away and quilt a larger square around the next, and then 1 more large square around the next set of blocks to finish quilting. Make sure all layers of your quilt are feeding evenly through your machine. If they are not, remove stitching, add more pins and try again.
  20. Remove your safety pins and you are finished! Give it a wash to make it wonderfully soft and crinkly. Perfect!
I’d love to see your creations! You can share your projects on Twitter and Instagram @sherrisylvester with the hashtag #alongforthreadride or #threadridinghood, or post them on the Thread Riding Hood Facebook page.

* This is a sponsored post, I was given the fabric from Stay Home Fabrics to complete this project. A always, all opinions are my own. *

Related Posts Plugin for WordPress, Blogger...
 
2 Responses leave one →
  1. September 2, 2014

    It looks great, I just may give it a try! I love the new Indelible line and took advantage of Lindsay’s code, yay I can’t wait for it to arrive.

    • September 3, 2014

      I really am going to have to get some Indelible too, Reece! The prints are amazing!

Leave a Reply

Note: You can use basic XHTML in your comments. Your email address will never be published.

Subscribe to this comment feed via RSS

CommentLuv badge